Code: 1112837 A

Taif Azarin Industrial Group is the first company in Iran that designs and manufacture metallographic laboratory equipment, so we like to talk about them because they are one of the best companies in Iran which work in the field of production.

Taif Azarin Industrial Group is the first company in Iran that designs and manufacture metallographic laboratory equipment, so we like to talk about them because they are one of the best companies in Iran which work in the field of production.

Taif Azarin Products

The products of this company can be divided into several parts, which are:

Thin section preparation

Polishing and Grinding

Cutting machine

Laboratory Core drill

Laboratory Crushers

Laboratory Mills

Rock and Soil test

Laboratory Mixer

Laboratory Hotplate

Electric sieve shaker

Rotary Sample divider

Riffle sample divider

You will get acquainted with some of the most famous and widely used products of this company. For the past 27 years, Taif Azarin Spectrum has been recognized as a leading and modern company in the production of laboratory equipment for materials science, geology and metallography. Introducing new models, new methods and easy to use are the basic principles used in the products of Taif Azarin Company.

 

Thin section preparation in Taif Azarin

Thin section preparation device used for applications such as geological, metallurgical and electrical studies. The two main steps for preparing these sections are cutting and sawing, which is done by this machine. This device makes it possible to prepare a thin section with a thickness of 35 microns. You can buy 12 types of these devices from the Taif Azarin group, each of which has a specific application as for example Full Automatic thin section preparation system.

Polishing and Grinding Device

Other laboratory products of Taif Azarin Company include Polishing and Grinding machine, which is produced and offered in 17 different types in this company. Some of the devices in this section include these items:

AUTOMATIC POLISHING SYSTEM, Automatic Grinding & Polishing Machine, Manual Polisher/Grinder Machine, Laboratory Grinding & Polishing Machine, Manual Polisher / Grinder Machine, UNIVERSAL / CUTTING & GRINDING MACHINE.

Taif Azarin Group Cutting machines

One of the methods to study the mechanical properties of rocks is direct cutting test. This test is known as the simplest and most common method used to determine the shear strength of rocks containing weak plates or discontinuities. This type of test is usually done in a laboratory. However, it may also be performed at the project site using a portable direct cutting machine. Since both shear and vertical pressures are applied with hand pumps in this test, there are ambiguities in the accuracy of the results. These ambiguities can be largely eliminated by applying shear stress using electric hydraulic pumps instead of existing mechanical pumps. Using this type of pump, the increase in shear stress during the test is regular and the rate of change can be controlled. A 12-volt battery powers electric pumps. Therefore, the advantage of portability of this device will be maintained.

A number of direct cutting experiments were performed using both machines (existing direct cutting machine and modified direct cutting machine). In order to compare the results of this experiment with the two devices, a number of artificial specimens containing a discontinuity have been tested. The results of this work show that there are differences between the results obtained from the two mentioned machines and this indicates that due to the accuracy of the modified machine, it should be based on the results of direct cutting test with a portable machine in the laboratory.

0

Laboratory Core drill

One of the most important tests to determine the strength of concrete in situ is to take the concrete core and test the compressive strength of the core. To do the coreing, special equipment is needed, which can be seen in the sample photo of the device available in the structural laboratory.  Taif Azarin Company is a manufacturer of all kinds of Laboratory Core drill devices. Three types of these devices are produced by the spectrum, which are: PORTABLE ELECTRO COREDRILL, Laboratory Cordrill, LABORATORY COREDRILL.

Ways of communication with Taif Azarin Company

Main office address: No 40 - AlborzBlg. -Kashanei Blvd.-Aryashahr-Tehran-Iran.  

WEB: https://www.taifazarin.com/

Phone: + 98 21 44077228

 

 

 

 

 

endNewsMessage1
Address Order Pressures Study Two
Send Comment